DC-315 Intumescent Coating for Spray Foam
International Fireproof Technology Brand DC315 Water Based Intumescent Paint for Coating Spray Foam Insulation.
DC315 is the most tested and approved product for use as an Alternative Thermal Barrier or Ignition Barrier Coating for Spray Polyurethane Foam (SPF). DC315 meets current AC377 and AC456 criteria assuring you the product you are applying is what was tested. DC315 carries multiple Evaluation Reports to ensure compliance with current IBC/IRC, NBCC and many International Codes.
Available in White, Dark Grey, and Icy Grey
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 “Special Approvals for Thermal Barriers over Foam Plastics”. DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.
- Finish: Flat
- Color: Off-White
- V.O.C.: (47 g/l)
- Volume Solids: 67%
- Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
- Type of Cure: Coalescence
- Flash Point: None
- Reducer/Cleaner: Water
- Shelf Life: 1 year (unopened)
- Packaging: 5 & 55 gallon containers
- Shipping weight: 5 gallon pail – 58 lbs.
- 55 gallon drum – 640 lbs.
- Application: Brush, roller, conventional and airless spray