Product Description
GHO 2:1 Transfer Pump for 55-Gallon Drums
High Output 2:1 Transfer Pumps
PMC Transfer Pumps are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals.
- GHO 2:1 High Output Stainless Steel Transfer Pump for 55-Gallon Drums
- GHO-S 2:1 High Output Stainless Steel Transfer Pump for 30-Gallon Drums
Technical Specifications |
GHO/GHO-S |
Pressure Ratio |
2.2:1 |
Output (Cont. Duty) |
5.5 Gals/min
(20.8 Liters/min)
|
Output (Int. Duty) |
11 Gals/min
(41.6 Liters/min)
|
Heater Wattage Cyclesper Gallon |
18.5 Cycles
|
Cycles per Liter |
4.88 Cycles
|
Stroke |
4″ (10.2 cm)
|
Maximum Air Pressure |
120 psi (8.273 bar)
|
Air Inlet |
1/4 NPT (F)
|
Fluid Output |
3/4 NPT (F)
|
Air Consumption |
2.0 cfm per gallon-pumped @ 100 psi
124.67 cc/sec per liter pumped @ 689 kpa
|
Weight |
25 lbs (11.4 kg)
|
GHO Length |
48.92”(1242.6 mm)
Used w/55 gallon drums
|
GHO-S Length |
45.03” (1143.8 mm)
Used w/30 gallon drums
|
